MULTI-CHEM UPE ATEX-FDA SD HOSE
Product params
Working Pressure [bar]
Burst Pressure [bar]
Inner Wall
Conductivity
Suction and discharge hose designed for transporting high-volume chemical
concentrations such as sulfuric acid, phosphoric acid, or solvents. The external layer
of the hose is resistant to abrasion and difficult environmental conditions, including UV-rays and ozone. The hose is fully conductive, i.e. R<10⁶ Ω, R<10⁹ Ω through the wall. In addition, it has food certificates allowing the hose to come into contact with food.
Hose approved for use in ATEX zones (0,1,2,20,21,22)
Inner wall: UPE
Outer wall: black EPDM
Reinforcements: two textile reinforcements, steel spiral
Working pressure: 16 BAR
Temperature range: -35°C to +100°C (depending on the medium)
Norms: EC 1935/2004, EN 12115:2011, TRbF 131 deel 2 par. 5.6, FDA 21 CFR 177.1520, BFR category III, DM 21/03/73, AS AMENDED, EUROPEAN REGULATIONS 1935/2004/EC & 10/2011/EC.
Size chart
id
Variant
Inner Diameter [mm]
Outer Diameter [mm]
Work Pressure - BAR [20°C]
Burst Pressure - BAR [20°C]
Vacuum - BAR [20°C]
Bending Radius [mm]
Coil [mtr]
Weight [kg/mtr]
Related products
Material
Hosetail
Sealing Ring
CAMLOCK COUPLING TYPE CS | SMOOTH HOSETAIL | 16 BAR | STAINLESS STEEL AISI 316 | SEALING RING: NBR
Material
Thread type
MATERIAL: STAINLESS STEEL 316 | OUTER THREAD BSP | SMOOTH HOSE TAIL FOR SAFETY CLAMPS AND CRIMPING ASSEMBLY
Material
Norm
MATERIAL: SS | NORM: EN 14420-3
