The amount of information and issues related to the tech industry seems endless. Working in the industry, each of us (literally) learns something new, expanding our experience and professionalism. Therefore, to make the work easier for ourselves and our clients, we have created and are still developing a knowledge base section on our website. All articles that you can explore were written under the watchful eye of professionals in a given field.
In our knowledge base you will find valuable articles and guides, such as a table with thread sizes, a comparison of different threads and a description of their differences, or advice on e.g. how to properly connect CAMLOCK connectors, how they differ from various industrial connection systems, as well as what is important when selecting a hose for an ATEX zone. Check this out now!
All categories
39 min
Check our pressure unit converter. We looked at the most popular pressure units such as bars, pascals, PSI, and atmospheres. See how you can convert...
Read
5 min
One inch equals exactly 25.4 millimetres. This value is fixed, making it a reliable standard for conversions.
Read
11 min
DN is the nominal diameter. "Diameter Nominal"). It acts as a standard nomenclature used to classify pipe sizes in the plumbing and construction indus...
Read
8 min
SBR rubber is a material with practical properties such as resistance to abrasion, stretching and tearing. This makes it ideal for manufacturing tough...
Read
9 min
NR rubber is an isoprene polymer, or elastomer. Its polymer chains reconnect when stretched, which gives the material its elasticity.
Read
12 min
NBR rubber is a synthetic rubber compound made from acrylonitrile and butadiene, known for its natural resistance to oils, fuels, water, and many chem...
Read
14 min
Sandblasting sand is an abrasive used in the sandblasting process, which is a method of cleaning, smoothing or making various surfaces rough by pressi...
Read
19 min
Sandblasting is a process during which the top layer of the material to be cleaned (e.g. rust, varnish, paint) is peeled off and its surface smoothed ...
Read
10 min
ADR placards are plates, stickers, and warning notices that provide information about the dangerous goods being transported. ADR markings provide bett...
Read
17 min
A sandblaster is a specialised piece of equipment used in various industries to clean, smooth or shape surfaces by shooting an abrasive material (such...
Read
5 min
Chillers play a very important role in many commercial buildings and industrial plants. Some production processes would simply be impossible without...
Read
12 min
Chillers are divided not only by the type of design and cooling method but also by mobility, the technology used or the industry purpose.
Read
8 min
Hose crimping is the process that involves bonding a hose to a metal tip. This allows you to later connect it to a pressure source. To crimp a hose,...
Read
4 min
There are two standards for Camlock couplings: the American one, namely A-A-59326D (formerly Mil-C-27487), and the European one, namely EN 14420-7. We...
Read
4 min
To measure Camlock couplings, you need the right tool. In this case, a tape measure, ruler or caliper will suffice.
Read
6 min
A pipe thread is a type of pipe connection that is used wherever we are dealing with plumbing or any flow of liquids (or other substances). It is also...
Read
6 min
The inch thread is a type of thread that originated from the inch unit of measurement instead of the metric unit. As we use the latter at our latitude...
Read
5 min
An external thread is a variation of a thread that has a coiling on the outside. It is most commonly found in the form of a screw, but no less common ...
Read